تفاصيل المنتج
مكان المنشأ: الصين
اسم العلامة التجارية: BLUWAT
إصدار الشهادات: ISO9001, SGS, BV
رقم الموديل: بعد المعاينة-01
شروط الدفع والشحن
الحد الأدنى لكمية: 1000KGS
الأسعار: negotiable
تفاصيل التغليف: 30KGS، 50KGS، 250kgs، 1250kgs الطبول
القدرة على العرض: 1000tons / ث
منتوج إسم: |
عامل Decoloring المياه BWD-01 |
عنصر: |
راتينج ديسياندياميد فورمالديهايد |
محتوى صلب: |
50٪ دقيقة |
اسم آخر: |
مادة كيميائية لإزالة اللون |
تطبيق: |
معالجة لون مياه الصرف الصحي للنسيج |
إزالة اللون: |
50 ~ 99٪ |
طاقة الإنتاجية: |
50000 طن / سنة |
قيمة الأس الهيدروجيني (30٪ الحل): |
3-6 |
اللزوجة (25 درجة مئوية ، cps): |
20-250 |
الصانع: |
ييشينغ Bluwat الكيميائية المحدودة |
عينة: |
خالية من 500 جرام |
طَرد: |
30 كلغ ، 50 كلغ ، 250 كلغ ، 1250 كلغ براميل |
منتوج إسم: |
عامل Decoloring المياه BWD-01 |
عنصر: |
راتينج ديسياندياميد فورمالديهايد |
محتوى صلب: |
50٪ دقيقة |
اسم آخر: |
مادة كيميائية لإزالة اللون |
تطبيق: |
معالجة لون مياه الصرف الصحي للنسيج |
إزالة اللون: |
50 ~ 99٪ |
طاقة الإنتاجية: |
50000 طن / سنة |
قيمة الأس الهيدروجيني (30٪ الحل): |
3-6 |
اللزوجة (25 درجة مئوية ، cps): |
20-250 |
الصانع: |
ييشينغ Bluwat الكيميائية المحدودة |
عينة: |
خالية من 500 جرام |
طَرد: |
30 كلغ ، 50 كلغ ، 250 كلغ ، 1250 كلغ براميل |
Color Removal from Textile Waste BWD-03 Water Decolorizing Agent Treat Wastewater Wastewater treatment in Paint Industry
TDS BWD-01 Water Decoloring Agent - Bluwat.pdf
Description:
Application Fields:
Competitive Advantage:
1 |
High performance in treating wastewater with Reactive, Acid, Disperse, Direct Dyestuff, etc. (Soluble and Insoluble dyestuffs). |
2 |
Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
3 |
Used to treat wastewater from the textile and dyeing industry, pigment industry, printing ink industry, and paper industry. |
4 |
Faster sedimentation, better flocculation. |
5 |
Non-pollution (no aluminum, chlorine, heavy metal ions, etc.). |
6 |
It can be used before or after biological treatment. |
7 |
Less sludge is produced than other inorganic coagulants. |
Appearance: | Colorless viscosity liquid, |
Solid Content: | ≥50% |
PH Value (30% Solution): | 3-6 |
Viscosity(25°C,cps): | 20-250 |
Solubility: | Soluble With Water at Any Rate |
1 |
Make a solution of BWD-01, and mix it with 40 times water to have a 2.5% solution for use. |
2 |
Make PAC solution, 2-5% Al2O3 |
3 |
Have a solution of Anionic Polyelectrolyte, 0.1%. |
4 |
Have effluent, test pH value, and adjust pH value to 8-9. (It is very important, higher or lower pH, BWD-01 works not well) |
5 |
Add PAC solution, and mix with effluent completely. about 1-3 minutes |
6 |
Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
7 |
Add a small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (This step is a suggestion) |
8 |
Sedimentation |
9 |
Check the color of treated effluent |
10 |
Adjust the dosage of BWD-01 and PAC to do more tests to have better testing results. |
Package and Storage: