|
| الاسم التجاري: | BLUWAT |
| رقم الموديل: | بلوفلوك |
| موك: | 1000 كلغ |
| السعر: | قابل للتفاوض |
| موعد التسليم: | في غضون 7-10 أيام عمل |
| شروط الدفع: | D/A، D/P، L/C، T/T، ويسترن يونيون |
BLUFLOC AA6518 Anionic PAM is a water soluble polyacrylamide powder used for oil drilling wastewater clarification and drilling fluid performance improvement. It helps flocculate fine suspended solids, improve solid liquid separation, support mud water clarification and enhance the stability of water based drilling fluid systems.
BLUFLOC AA6518 Anionic PAM is a high performance anionic polyacrylamide powder designed for oilfield drilling wastewater treatment and drilling fluid performance support. It is suitable for applications where fine suspended solids, drilling mud particles, clay, silt and inorganic solids need to be flocculated and settled more efficiently.
During oil drilling operations, large amounts of drilling wastewater and mud water may be generated from mud circulation, solids control, drilling fluid recovery, equipment cleaning and waste mud treatment. These waters often contain fine particles, suspended solids, clay, bentonite, drilling additives and dispersed mud solids.
BLUFLOC AA6518 helps improve floc formation, accelerate sedimentation and support clearer supernatant in oilfield wastewater clarification systems.
It can also be used as a drilling fluid performance support polymer where viscosity, suspension, lubrication and mud stability need improvement.
Anionic PAM powder designed for oil drilling wastewater clarification and mud water treatment.
Suitable for flocculating drilling mud solids, fine particles, clay, silt and inorganic suspended solids.
Helps improve solid liquid separation in oilfield wastewater treatment systems.
Supports clearer water recovery from drilling mud systems and mud water clarification processes.
Improves floc formation and settling speed for fine suspended particles.
Can support drilling fluid viscosity, suspension and stability in selected water based mud systems.
Minimum 89 percent solid content supports stable quality and consistent field dosing.
20 to 100 mesh granular powder is suitable for industrial handling, storage and solution preparation.
Low dosage requirement helps reduce treatment cost in oilfield wastewater clarification systems.
Suitable for oilfield service companies, drilling contractors, chemical distributors and mud treatment operators.
| Item | Specification |
|---|---|
| Product Name | BLUFLOC AA6518 Anionic PAM |
| Product Type | Anionic Polyacrylamide Powder |
| Ionic Type | Anionic |
| Appearance | Off White Granular Powder |
| Particle Size | 20 to 100 Mesh |
| Molecular Weight Range | 5 to 25 Million for Anionic Type |
| Anionic Degree Range | 5 to 100 Percent |
| Solid Content | Minimum 89 Percent |
| Bulk Density | About 0.8 |
| Residual Monomer | Max 0.05 Percent |
| Recommended Working Concentration | 0.1 to 0.5 Percent |
| pH of 1 Percent Solution | Around 6 to 8 for Anionic Type |
| Storage Temperature | 0 to 35 Degree C |
| Shelf Life | 2 Years |
| Package | 25 kg Bag or 750 kg Big Bag |
| Documents | TDS, MSDS and COA Available |
AA6518 is used to clarify wastewater generated from oil drilling operations. It helps gather fine suspended particles into larger flocs, allowing them to settle faster and improving the clarity of the treated water.
In drilling mud water treatment, AA6518 can help separate dispersed mud solids from water. This supports water recovery, mud system management and easier downstream treatment.
Fine drilling solids are often difficult to settle naturally. AA6518 improves flocculation and sedimentation, helping reduce turbidity and suspended solids in mud water.
AA6518 can be used in settling tanks, clarification systems, sludge thickening units and other solid liquid separation processes in oilfield wastewater treatment.
Besides wastewater clarification, AA6518 can also support water based drilling fluid performance. It may help improve viscosity, suspension, mud stability and rheological control depending on the formulation.
Drilling wastewater often contains cuttings fines, clay particles and dispersed solids. AA6518 helps improve aggregation of these fine particles, making separation easier.
By improving clarification and sedimentation, AA6518 can support water recovery in oilfield operations where treated water needs to be reused or sent for further treatment.
AA6518 can help improve sludge settling and thickening performance in selected oilfield mud water treatment and wastewater clarification systems.
This product is suitable for oilfield service companies, drilling contractors and chemical distributors who need stable anionic PAM for mud water treatment.
Oil drilling wastewater usually contains a high level of suspended solids and fine mud particles. These particles may remain dispersed in water for a long time and make clarification difficult.
BLUFLOC AA6518 Anionic PAM has strong flocculation performance for inorganic suspended solids, mud particles and fine mineral solids. After proper dissolution, it forms a polymer solution that bridges small particles together and creates larger flocs.
The larger flocs settle faster and help improve water clarity, making AA6518 suitable for oilfield mud water clarification, drilling wastewater pre treatment, sludge thickening and selected drilling fluid support applications.
AA6518 works mainly through polymer bridging and flocculation. After the powder is fully dissolved in water, the polymer chains can connect fine suspended particles and form larger flocs. These flocs are easier to settle or separate from the water phase.
In drilling wastewater treatment, this helps reduce turbidity, improve settling speed and support better solid liquid separation. In drilling fluid systems, the polymer structure may also help improve viscosity, suspension and mud stability depending on the system design.
For oil drilling wastewater clarification, the common process can be adjusted according to water quality. The exact process should be confirmed by jar test or field trial.
The actual dosage depends on wastewater turbidity, suspended solids concentration, drilling mud composition, salinity, temperature, pH, oil content and treatment target.
For drilling wastewater clarification, laboratory jar testing is recommended before large scale dosing. For drilling fluid performance improvement, compatibility testing with the existing mud formulation is recommended.
Bluwat can provide product selection advice and dosing recommendations according to customer samples and field requirements.
Suitable for clarifying drilling wastewater and supporting mud water treatment systems.
Effective for flocculating fine mud particles, clay, silt and inorganic suspended solids.
Supports clearer water recovery from mud water and drilling wastewater systems.
Suitable for clarification, sedimentation, sludge thickening and solid liquid separation.
Can support drilling fluid viscosity, suspension and stability in selected water based mud systems.
Low dosage requirement helps reduce treatment cost in oilfield wastewater applications.
Minimum 89 percent solid content and 20 to 100 mesh powder form support stable field use.
Factory direct supply from China with TDS, MSDS, COA, sample support and customized grade options.
Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.
Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, industrial wastewater treatment, mining, papermaking, municipal sewage treatment and sludge dewatering.
For oilfield customers, Bluwat can provide technical support, sample support, TDS, MSDS, COA, product selection recommendations and customized polymer grades according to drilling wastewater and mud treatment conditions.
BLUFLOC AA6518 Anionic PAM is used for oil drilling wastewater clarification, drilling mud solids settling, mud water treatment, solid liquid separation and drilling fluid performance improvement.
Yes. AA6518 is suitable for selected oilfield wastewater applications, especially where fine suspended solids, mud particles and drilling solids need to be settled or separated.
Yes. AA6518 helps fine particles form larger flocs, which can settle faster and improve the clarity of treated water.
Yes. AA6518 can be used as a support polymer in selected water based drilling fluid systems to improve viscosity, suspension and mud stability. Compatibility testing is recommended before field use.
The recommended dissolving concentration is 0.1 to 0.5 percent.
Normally it takes about 1 hour under proper agitation conditions.
Yes. In many wastewater treatment systems, PAM can be used together with a coagulant to improve floc formation and solid liquid separation. The best dosing order should be confirmed by jar test.
The standard package is 25 kg bag. 750 kg big bag is also available.
Yes. Bluwat can recommend AA6518 or other anionic PAM grades according to wastewater sample, suspended solids level, salinity, treatment process and field conditions.
BLUFLOC AA6518 Anionic PAM helps improve drilling wastewater clarification, mud water treatment, fine solids flocculation, solid liquid separation and selected drilling fluid performance. Bluwat can provide factory direct supply, technical documents, sample support and customized PAM grade selection for oilfield customers.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski